Monday, September 3, 2012

DIY Colorful Wrapped Earphones

When I made my first pair of these, I got SO many compliments and questions on how to make them. So here are the instructions! (Tutorial after the jump)







What you'll need:
  • Earphones
  • Embroidery floss
  • Tape
  • A good movie (because you're gonna be sitting for a while!)
  • Clear glue (Not pictured. I used E6000)
  • Scissors (Not pictured)


All you need to know is how to make a Chinese staircase knot. There are good instructions here but I'll also show you how to do it in this tutorial too.

Tape down the end of your earphones
Make a simple knot where the cord starts


Pull tightly


Hold the tail of the string
Cross the working end of the string over the cord AND the tail


Pull the working end under the cord then under the loop you made


Pull tightly. Repeat until you get the desired length for this color


Cut your string
Tie a simple knot around the cord AND tail of previous string


Make sure you hold the tails down as you continue knotting


Here are my earphones so far. Pretty cool huh? Experiment with the lengths of each color for a more interesting look


When you reach a stopping point (like where the earphones split or the mic), just cut your string, leaving a tiny bit. Put a dab of glue on the cord


Wrap the bit of string around the cord, smoothing it onto the glue


Sidenote: I forgot about this little sliding part (GRRR!), I meant to slide it all the way down. But I was not going to undo that string so I kind of skipped over it. Also, you may notice your cord getting wavy. To combat that, don't pull your cord or string too tightly. It won't hurt your earphones though, I promise

After the cord splits, just wrap each cord individually

DONE! Enjoy the compliments that you are sure to receive!



1 comment:


  1. Their tiny earpieces rest on the outer ear or need to be inserted into the ear canal. Ultracompact and lightweight, earbuds are the most portable of all Earphones, and they can provide excellent isolation from external noise when paired with a well-fitted tip.

    ReplyDelete